If this is the first time pairing your BRV-S, please click here.
1. Start with all speakers powered off.
2. Power on the first speaker and let it re-connect to your phone.
3. After you have connected the first BRV-S speaker to your source device (smartphone, tablet, etc.), turn on any other BRV-S speakers that you want to connect to the first one.
4. Connect the BRV-S speakers together simply but touching the TAP/IN symbols located on the grill together for 2-3 sec. Both lights should turn GREEN to confirm they are in broadcast mode. You'll also hear a guitar riff to confirm. Wait a few seconds and the speakers will start playing music!
Note: Only the speaker that is paired to your phone can control the entire group volume, pause/play, skip songs.
Note: Controls on each other speaker will only control that speaker's volume.
Alternate TAP/IN Instructions
If you are unable to pair the speakers together using the TAP/IN method, no worries! You can also do the following:
1. Power on the first speaker and let it re-connect to your phone. If this is the first time pairing to it, please click here.
2. After you have connected you source device, turn on any other BRV-S speakers that you want to connect to the first one.
3. Connect the BRV-S speakers together by pressing and holding the LINK button for 2-3 seconds. The light should turn WHITE -> GREEN to confirm it is in broadcast mode, and you will hear a guitar riff.
TAP/IN: Disconnect Speakers from a Group
The light should turn WHITE -> GREEN to confirm it is in broadcast mode, and you will hear a guitar riff.