1. Long press the “O” button to power on the BRV-105 to automatically begin pairing mode. LED behind the grill will blink rapidly.
2. Activate Bluetooth® on the phone or device you are pairing with (see your device’s instruction manual for information on activating its Bluetooth® settings). Be sure all other devices that accept a Bluetooth® signal are out of range or have Bluetooth® turned off.
3. Go to your phone or device’s Bluetooth® settings and select “BRV-105” from the list.
4. If asked for a passcode, enter “0 0 0 0”.
5. You will hear a single beep when BRV-105 is paired with your device. NOTE: BRV-105 only remembers 1 device.
NOTE: If your BRAVEN does not have an active Bluetooth® connection and is left on, it will shut itself off after 30 minutes. To restart your BRAVEN you will need to press and hold the power button for 2-3 seconds.
PAIR A NEW DEVICE
1. If you’d like to pair BRV-105 to a new device, long press “O” to turn off speaker. Once speaker is off, long press “O” until you hear the speaker power on, and keep holding until you hear the pairing sound.
2. Activate Bluetooth® on the phone or device you are pairing with (see your device’s instruction manual for information on activating its Bluetooth® settings). NOTE: Speaker can ONLY be put into pairing mode when the speaker is first turned on.
3. Go to your phone or device’s Bluetooth® settings and select “BRV-105” from the list.
4. If asked for a passcode, enter “0 0 0 0”.