Follow

Inserting/removing your Tablet for Slim Book

To insert your tablet into the Slim Book, open the Book’s case and remove it from the keyboard (to do this, pull the case up and away from the keyboard). Then, line
 your tablet with the holes in the case. Make sure the camera hole is aligned properly as well as the opening for the cable. When everything is aligned, set the bottom half of your tablet in the cover and apply light pressure to ensure it is properly settled. Snap the top half of your tablet into the cover. Check all corners to make sure they have seated properly.

When your tablet is secure in the case, you can connect it to the keyboard by placing it in the magnetic trough. Powerful magnets will secure it in place, but also allow you to remove your tablet any time it benefits you.

To easily remove your tablet from the case, separate the case from the keyboard, and then gently pull the case away from the edges while pressing the tablet from behind. Grasp your tablet’s exposed side and lift/pull away from the Slim Book.

Was this article helpful?
1 out of 1 found this helpful