1. Hold your device in landscape mode with the volume control buttons facing up. Insert the top half of your device at an angle into the top of the case and apply light pressure to snap it snuggly into place.
2. Press the bottom half of your device into the cover and press it in. Press all around your device to ensure it has seated properly.
3. Once your device has been inserted into the case, set the case into the cradle hinge on the keyboard. You should feel the magnets connect as the case clicks into place.
4. To easily remove your device from the case, first detach the case from the keyboard. Then hold the top of the case with one hand and press against the back of the case with the other. Then grasp the exposed side of your device and lift/pull it away from the cover.